Load Balancing Menggunakan 2 Line Speedy, untuk 2 hotspot +1 lan

/ ip firewall mangle


add chain=prerouting src-address=192.168.9.0/24 action=mark-routing new-routing-mark=to-isp-01 passthrough=no disabled=yes comment="LAN 1 ke speedy 1"


add chain=prerouting src-address=192.168.2.0/24 action=mark-routing new-routing-mark=to-isp-02 passthrough=no disabled=yes comment="wifi1 ke speedy 2"


add chain=prerouting src-address=10.5.50.0/24 action=mark-routing new-routing-mark=to-isp-02 passthrough=no disabled=yes comment="wifi1 ke speedy 2"



add chain=forward src-address=192.168.9.0/24 routing-mark=to-isp-01 action=mark-connection new-connection-mark=users-con-lan-01 passthrough=yes disabled=yes
add chain=forward connection-mark=users-con-lan-01 action=mark-packet new-packet-mark=users-lan-01 passthrough=yes disabled=yes


add chain=forward src-address=192.168.2.0/24 routing-mark=to-isp-02 action=mark-connection new-connection-mark=users-con-lan-02 passthrough=yes disabled=yes
add chain=forward connection-mark=users-con-lan-02 action=mark-packet new-packet-mark=users-lan-02 passthrough=yes disabled=yes


add chain=forward src-address=10.5.50.0/24 routing-mark=to-isp-02 action=mark-connection new-connection-mark=users-con-lan-02 passthrough=yes disabled=yes
add chain=forward connection-mark=users-con-lan-02 action=mark-packet new-packet-mark=users-lan-02 passthrough=yes disabled=yes



/ip firewall nat


add chain=srcnat src-address=192.168.9.0/24 action=masquerade disabled=yes comment="masquerade lan"

add chain=srcnat src-address=192.168.2.0/24 action=masquerade disabled=yes comment="masquerade hotspot"

add chain=srcnat src-address=10.5.50.0/24 action=masquerade disabled=yes comment="masquerade hotspot2"

Lanjutkan Membaca >>> Load Balancing Menggunakan 2 Line Speedy, untuk 2 hotspot +1 lan

Load Balance Mikrotik 2 Wlan ( SPeedy)

/ ip address
add address=192.168.9.1/24 network=192.168.9.0 broadcast=192.168.9.255 interface=Local comment="" disabled=no
add address=192.168.7.2/24 network=192.168.7.0 broadcast=192.168.7.255 interface=wlan2 comment="" disabled=no
add address=192.168.5.2/24 network=192.168.5.0 broadcast=192.168.5.255 interface=wlan1 comment="" disabled=no


/ ip firewall mangle
add chain=prerouting in-interface=Local connection-state=new nth=1,1,0 action=mark-connection new-connection-mark=odd passthrough=yes comment="" disabled=no
add chain=prerouting in-interface=Local connection-mark=odd action=mark-routing new-routing-mark=odd passthrough=no comment="" disabled=no
add chain=prerouting in-interface=Local connection-state=new nth=1,1,1 action=mark-connection new-connection-mark=even passthrough=yes comment="" disabled=no
add chain=prerouting in-interface=Local connection-mark=even action=mark-routing new-routing-mark=even passthrough=no comment="" disabled=no

/ ip firewall nat
add chain=srcnat connection-mark=odd action=src-nat to-addresses=192.168.7.2 to-ports=0-65535 comment="" disabled=no
add chain=srcnat connection-mark=even action=src-nat to-addresses=192.168.5.2 to-ports=0-65535 comment="" disabled=no

/ ip route
add dst-address=0.0.0.0/0 gateway=192.168.5.1 scope=255 target-scope=10 routing-mark=odd comment="" disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.7.1 scope=255 target-scope=10 routing-mark=even comment="" disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.5.1 scope=255 target-scope=10 comment="" disabled=no

Lanjutkan Membaca >>> Load Balance Mikrotik 2 Wlan ( SPeedy)

Pisahkan Bandwidth Internasional dan IIX 2 lancard

Download file nice.rsc copy paste isinya ke notepad dan save as menjadi nice.rsc (File tersebut akan menambahkan IP-IP IIX pada address-list)

• Copy file tersebut dan upload ke mikrotik anda menggunakan FTP
• ketik pada terminal “/import nice.rsc”
• Lihat pada ip > firewall > address-list, disitu akan bertambah ip-ip yang buanya
• 192.168.9.0/24 ip lokal
  

Sekarang kita buat packet marknya di IP > Firewall > Mangle

/ip firewall mangle
add chain=prerouting src-address=192.168.9.0/24 action=mark-connection new-connection-mark="Koneksi Semua Trafik" passthrough=yes comment="Mark-connection Semua Trafik" disabled=yes

add chain=prerouting src-address=192.168.100.0/24 connection-mark="Koneksi Semua Trafik" dst-address-list=!nice action=mark-connection new-connection-mark="Koneksi Internasional" passthrough=yes comment="Mark-connection Koneksi Internasional" disabled=yes

add chain=prerouting connection-mark="Koneksi Internasional" action=mark-packet new-packet-mark="Koneksi Internasional" passthrough=no comment="Mark-packet koneksi internasional" disabled=yes

add chain=prerouting action=mark-packet new-packet-mark="Koneksi IIX" passthrough=no comment="Mark-packet Koneksi IIX" disabled=yes

Buat limit bandwidth sesuka anda untuk kedua koneksi tersebut

/ queue simple
add name="Internasional" target-addresses=192.168.9.0/24 dst-address=0.0.0.0/0 interface=all parent=none packet-marks="Koneksi Internasional" direction=both priority=8 queue=default-small/default-small limit-at=0/0 max-limit=256000/256000 total-queue=default-small disabled=yes

add name="IIX" target-addresses=192.168.9.0/24 dst-address=0.0.0.0/0 interface=all parent=none packet-marks="Koneksi IIX" direction=both priority=8 queue=default-small/default-small limit-at=0/0 max-limit=1024000/1024000 total-queue=default-small disabled=yes

Lanjutkan Membaca >>> Pisahkan Bandwidth Internasional dan IIX 2 lancard

Firewal Basic tuk Mikrotik

Katakanlah jaringan Lokal kita adalah 192.168.0.0/24 dan publik (WAN) adalah interface ether1. kita akan mengatur firewall untuk mengizinkan koneksi ke router itu sendiri hanya dari jaringan lokal kita dan drop sisanya. Juga kami akan mengizinkan protokol ICMP pada setiap antarmuka sehingga siapa pun dapat ping router anda dari internet.

[X]Router protection

/ip firewall filter
add chain=input connection-state=invalid action=drop \
comment="Drop Invalid connections"
add chain=input connection-state=established action=accept \
comment="Allow Established connections"
add chain=input protocol=icmp action=accept \
comment="Allow ICMP"
add chain=input src-address=192.168.9.0/24 action=accept \
in-interface=!speedy
add chain=input action=drop comment="Drop everything else"

[X]Customer protection

/ip firewall filter
add chain=forward protocol=tcp connection-state=invalid \
action=drop comment="drop invalid connections"
add chain=forward connection-state=established action=accept \
comment="allow already established connections"
add chain=forward connection-state=related action=accept \
comment="allow related connections"

[X]Block "bogon" IP addresses

add chain=forward src-address=0.0.0.0/8 action=drop
add chain=forward dst-address=0.0.0.0/8 action=drop
add chain=forward src-address=127.0.0.0/8 action=drop
add chain=forward dst-address=127.0.0.0/8 action=drop
add chain=forward src-address=224.0.0.0/3 action=drop
add chain=forward dst-address=224.0.0.0/3 action=drop

[X]Make jumps to new chains:

add chain=forward protocol=tcp action=jump jump-target=tcp
add chain=forward protocol=udp action=jump jump-target=udp
add chain=forward protocol=icmp action=jump jump-target=icmp

[X]Create tcp chain and deny some tcp ports in it:

add chain=tcp protocol=tcp dst-port=69 action=drop \
comment="deny TFTP"
add chain=tcp protocol=tcp dst-port=111 action=drop \
comment="deny RPC portmapper"
add chain=tcp protocol=tcp dst-port=135 action=drop \
comment="deny RPC portmapper"
add chain=tcp protocol=tcp dst-port=137-139 action=drop \
comment="deny NBT"
add chain=tcp protocol=tcp dst-port=445 action=drop \
comment="deny cifs"
add chain=tcp protocol=tcp dst-port=2049 action=drop comment="deny NFS"
add chain=tcp protocol=tcp dst-port=12345-12346 action=drop comment="deny NetBus"
add chain=tcp protocol=tcp dst-port=20034 action=drop comment="deny NetBus"
add chain=tcp protocol=tcp dst-port=3133 action=drop comment="deny BackOriffice"
add chain=tcp protocol=tcp dst-port=67-68 action=drop comment="deny DHCP"

[X]Deny udp ports in udp chain:

add chain=udp protocol=udp dst-port=69 action=drop comment="deny TFTP"
add chain=udp protocol=udp dst-port=111 action=drop comment="deny PRC portmapper"
add chain=udp protocol=udp dst-port=135 action=drop comment="deny PRC portmapper"
add chain=udp protocol=udp dst-port=137-139 action=drop comment="deny NBT"
add chain=udp protocol=udp dst-port=2049 action=drop comment="deny NFS"
add chain=udp protocol=udp dst-port=3133 action=drop comment="deny BackOriffice"

[X]Allow only needed icmp codes in icmp chain:

add chain=icmp protocol=icmp icmp-options=0:0 action=accept \
comment="drop invalid connections"
add chain=icmp protocol=icmp icmp-options=3:0 action=accept \
comment="allow established connections"
add chain=icmp protocol=icmp icmp-options=3:1 action=accept \
comment="allow already established connections"
add chain=icmp protocol=icmp icmp-options=4:0 action=accept \
comment="allow source quench"
add chain=icmp protocol=icmp icmp-options=8:0 action=accept \
comment="allow echo request"
add chain=icmp protocol=icmp icmp-options=11:0 action=accept \
comment="allow time exceed"
add chain=icmp protocol=icmp icmp-options=12:0 action=accept \
comment="allow parameter bad"
add chain=icmp action=drop comment="deny all other types"

Lanjutkan Membaca >>> Firewal Basic tuk Mikrotik

Membuat Transparent web proxy Mikrotik

Fungsi utama proxy adalah untuk menyimpan cache Apabila sebuah LAN menggunakan proxy untuk berhubungan dengan Internet, maka ketika browser di client (port web) mengakses sebuah url sebuah web maka mengambil request tersebut di proxy server Dan jika data itu belum ada di proxy server maka proxy mengambil langsung dari web bersangkutan Lalu request tersebut juga disimpan di cache proxy Maka jika ada lagi client yang melakukan request ke url yang sama, maka akan diambilkan dari cache itu (dalam jaringan lokal berarti) Sehingga ini akan membuat akses ke Internet terasa lebih cepat Dan Transparent proxy kita buat untuk memastikan setiap pengguna mengakses Internet melalui web proxy yang telah kita aktifkan (diatas) Sebab setiap request dari Browser client yang menggunakan gateway kita secara otomatis akan dilewatkan ke proxy Jadi dengan hal ini juga akan mempermudah administrasi client: Tidak perlu lagi melakukan setup proxy ditiap browser client (karena dilakukan redirection otomatis disisi server).

[x] Set Proxy
Via Command:
IP Proxy
/ip proxy set enabled=yes

#Mengaktifkan fiture web proxy
maximal-client-connections=1000
maximal-server-connections=1000

IP Web-Proxy
/ ip web-proxy set enabled=yes

#Mengaktifkan web proxy (adanya IP Proxy dan IP Web-Proxy tergantung versi mikrotik kita)

set src-address=0.0.0.0
# address yang akan kita gunakan untuk koneksi ke parent proxy (defaultnya 0.0.0.0)

set port=8080
#Port yang mau digunakan untuk web proxy

set hostname=”proxy.zen.com”
#Nama Hostname untuk Web Proxy (optional)

set transparent-proxy=yes
#Mengaktifkan transparant proxy

set parent-proxy=0.0.0.0:0
#Diisi jika kita ingin menggunakan parent proxy (optional)

set cache-administrator=”zen@bismillah.com”
# email administrator support yang akan dikirim status, seperti jika proxy error

set max-object-size=8192KiB
#ukuran maximal file yang akan disimpan sebagai cache (default 4096Kilobytes)

set cache-drive=system
#drive tempat penyimpanan cache

set max-cache-size=unlimited
# ukuran maximal hardisk yang akan dipakai sebagai penyimpan file cache (misalnya 3 kali total RAM atau unlimited)

# maximal ram yang akan digunakan untuk cache

[x] Membuat Rule NAT untuk transparent proxy Me-redirect port web ke transparent proxy: "Mengarahkan semua trafik yang menuju Port 80,3128,8000 kita belokkan menuju port 8080, yaitu portnya Web-Proxy"

/ip firewall nat add chain=dstnat protocol=tcp dst-port=80 action=redirect to-ports=8080
# Redirect port 80 to 8080 for proxy server
/ip firewall nat add chain=dstnat protocol=tcp dst-port=3128 action=redirect to-ports=8080
# Redirect port 3128 to 8080 for proxy server
/ip firewall nat add chain=dstnat protocol=tcp dst-port=8080 action=redirect to-ports=8080
# Redirect port 8080 to 8080 for proxy server

[x] Melihat Tabel NAT
/ip firewall nat print

[x] Check Web Proxy:
/ip web-proxy print

[x] Melihat hasil konfigurasi web-proxy
/ip web-proxy print

[x] Memonitoring kerja web-proxy
/ip web-proxy monitor

Lanjutkan Membaca >>> Membuat Transparent web proxy Mikrotik

firewall Mikrotik satu

/ ip firewall filter
add chain=input connection-state=invalid action=drop comment="Drop Invalid \
connections" disabled=no
add chain=input src-address=!192.168.0.0/27 protocol=tcp src-port=1024-65535 \
dst-port=8080 action=drop comment="Block to Proxy" disabled=no
add chain=input protocol=udp dst-port=12667 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=udp dst-port=27665 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=udp dst-port=31335 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=udp dst-port=27444 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=udp dst-port=34555 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=udp dst-port=35555 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=27444 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=27665 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=31335 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=31846 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=34555 action=drop comment="Trinoo" \
disabled=no
add chain=input protocol=tcp dst-port=35555 action=drop comment="Trinoo" \
disabled=no
add chain=input connection-state=established action=accept comment="Allow \
Established connections" disabled=no
add chain=input protocol=udp action=accept comment="Allow UDP" disabled=no
add chain=input protocol=icmp action=accept comment="Allow ICMP" disabled=no
add chain=input src-address=192.168.0.0/27 action=accept comment="Allow access \
to router from known network" disabled=no
add chain=input action=drop comment="Drop anything else" disabled=no
add chain=forward protocol=tcp connection-state=invalid action=drop \
comment="drop invalid connections" disabled=no
add chain=forward connection-state=established action=accept comment="allow \
already established connections" disabled=no
add chain=forward connection-state=related action=accept comment="allow \
related connections" disabled=no
add chain=forward src-address=0.0.0.0/8 action=drop comment="" disabled=no
add chain=forward dst-address=0.0.0.0/8 action=drop comment="" disabled=no
add chain=forward src-address=127.0.0.0/8 action=drop comment="" disabled=no
add chain=forward dst-address=127.0.0.0/8 action=drop comment="" disabled=no
add chain=forward src-address=224.0.0.0/3 action=drop comment="" disabled=no
add chain=forward dst-address=224.0.0.0/3 action=drop comment="" disabled=no
add chain=forward protocol=tcp action=jump jump-target=tcp comment="" \
disabled=no
add chain=forward protocol=udp action=jump jump-target=udp comment="" \
disabled=no
add chain=forward protocol=icmp action=jump jump-target=icmp comment="" \
disabled=no
add chain=tcp protocol=tcp dst-port=69 action=drop comment="deny TFTP" \
disabled=no
add chain=tcp protocol=tcp dst-port=111 action=drop comment="deny RPC \
portmapper" disabled=no
add chain=tcp protocol=tcp dst-port=135 action=drop comment="deny RPC \
portmapper" disabled=no
add chain=tcp protocol=tcp dst-port=137-139 action=drop comment="deny NBT" \
disabled=no
add chain=tcp protocol=tcp dst-port=445 action=drop comment="deny cifs" \
disabled=no
add chain=tcp protocol=tcp dst-port=2049 action=drop comment="deny NFS" \
disabled=no
add chain=tcp protocol=tcp dst-port=12345-12346 action=drop comment="deny \
NetBus" disabled=no
add chain=tcp protocol=tcp dst-port=20034 action=drop comment="deny NetBus" \
disabled=no
add chain=tcp protocol=tcp dst-port=3133 action=drop comment="deny \
BackOriffice" disabled=no
add chain=tcp protocol=tcp dst-port=67-68 action=drop comment="deny DHCP" \
disabled=no
add chain=udp protocol=udp dst-port=69 action=drop comment="deny TFTP" \
disabled=no
add chain=udp protocol=udp dst-port=111 action=drop comment="deny PRC \
portmapper" disabled=no
add chain=udp protocol=udp dst-port=135 action=drop comment="deny PRC \
portmapper" disabled=no
add chain=udp protocol=udp dst-port=137-139 action=drop comment="deny NBT" \
disabled=no
add chain=udp protocol=udp dst-port=2049 action=drop comment="deny NFS" \
disabled=no
add chain=udp protocol=udp dst-port=3133 action=drop comment="deny \
BackOriffice" disabled=no
add chain=input protocol=tcp psd=21,3s,3,1 action=add-src-to-address-list \
address-list="port scanners" address-list-timeout=2w comment="Port \
scanners to list " disabled=no
add chain=input protocol=tcp tcp-flags=fin,!syn,!rst,!psh,!ack,!urg \
action=add-src-to-address-list address-list="port scanners" \
address-list-timeout=2w comment="NMAP FIN Stealth scan" disabled=no
add chain=input protocol=tcp tcp-flags=fin,syn action=add-src-to-address-list \
address-list="port scanners" address-list-timeout=2w comment="SYN/FIN \
scan" disabled=no
add chain=input protocol=tcp tcp-flags=syn,rst action=add-src-to-address-list \
address-list="port scanners" address-list-timeout=2w comment="SYN/RST \
scan" disabled=no
add chain=input protocol=tcp tcp-flags=fin,psh,urg,!syn,!rst,!ack \
action=add-src-to-address-list address-list="port scanners" \
address-list-timeout=2w comment="FIN/PSH/URG scan" disabled=no
add chain=input protocol=tcp tcp-flags=fin,syn,rst,psh,ack,urg \
action=add-src-to-address-list address-list="port scanners" \
address-list-timeout=2w comment="ALL/ALL scan" disabled=no
add chain=input protocol=tcp tcp-flags=!fin,!syn,!rst,!psh,!ack,!urg \
action=add-src-to-address-list address-list="port scanners" \
address-list-timeout=2w comment="NMAP NULL scan" disabled=no
add chain=input src-address-list="port scanners" action=drop comment="dropping \
port scanners" disabled=no
add chain=icmp protocol=icmp icmp-options=0:0 action=accept comment="drop \
invalid connections" disabled=no
add chain=icmp protocol=icmp icmp-options=3:0 action=accept comment="allow \
established connections" disabled=no
add chain=icmp protocol=icmp icmp-options=3:1 action=accept comment="allow \
already established connections" disabled=no
add chain=icmp protocol=icmp icmp-options=4:0 action=accept comment="allow \
source quench" disabled=no
add chain=icmp protocol=icmp icmp-options=8:0 action=accept comment="allow \
echo request" disabled=no
add chain=icmp protocol=icmp icmp-options=11:0 action=accept comment="allow \
time exceed" disabled=no
add chain=icmp protocol=icmp icmp-options=12:0 action=accept comment="allow \
parameter bad" disabled=no
add chain=icmp action=drop comment="deny all other types" disabled=no
add chain=tcp protocol=tcp dst-port=25 action=reject \
reject-with=icmp-network-unreachable comment="Smtp" disabled=no
add chain=tcp protocol=udp dst-port=25 action=reject \
reject-with=icmp-network-unreachable comment="Smtp" disabled=no
add chain=tcp protocol=tcp dst-port=110 action=reject \
reject-with=icmp-network-unreachable comment="Smtp" disabled=no
add chain=tcp protocol=udp dst-port=110 action=reject \
reject-with=icmp-network-unreachable comment="Smtp" disabled=no
add chain=tcp protocol=udp dst-port=110 action=reject \
reject-with=icmp-network-unreachable comment="Smtp" disabled=no

Lanjutkan Membaca >>> firewall Mikrotik satu

windows menampilkan : NTLDR is Missing. "Press any key to restart"

NTLDR is Missing. "Press any key to restart"

wat orang yg masih awam ma trobleshot windows pertama kali dapet itu pasti puyeng... tapi tenang aja. banyak dokter yg ampuh tuk menyembuhkan win anda. salah satu dokter paling ampuh ya "GOOGLE"..buktinya anda nemu tulisan ini...via google kan :D ukey...mari kita tlusur pnya tlusur...ala dokter :

NTLDR is Missing. "Press any key to restart" + tampilan biru tua jelek banget...

kita cb cari tau penyebabnya,cb perhatikan mungkin ini yg telah anda lakukan sehingga win nampiln screen sperti itu :

1. Komputer boot dari non-bootable source.
2. Computer hard disk drive tidak benar setup di BIOS.
3. Korup NTLDR dan / atau NTDETECT.COM file.
4. Misconfiguration dengan file boot.ini.
5. Mencoba untuk meng-upgrade dari Windows 95, 98, atau ME komputer yang menggunakan FAT32.
6. Hard disk baru yang ditambahkan.
7. Corrupt boot sector / master boot record.
8. Kerusakan serius versi Windows 2000 atau Windows XP.
9. Longgar atau rusak IDE / EIDE hard disk drive kabel.
10. Gagal untuk mengaktifkan USB keyboard dukungan di BIOS.
    

untuk memperbaiki kerusakan window xp ikuti langkah brikut :


Windows XP pengguna

# Masukkan CD bootable Windows XP ke dalam komputer.
#Ketika diminta untuk menekan tombol apa saja untuk boot dari CD, tekan tombol apa saja.
#Setelah di menu setup Windows XP tekan tombol "R" untuk perbaikan Windows.
#Masuk ke instalasi Windows Anda dengan menekan tombol "1" kunci dan menekan enter.
#Anda kemudian akan diminta untuk sandi administrator Anda, masukkan password.
#Salin di bawah dua file ke root direktori utama harddisk.Pada contoh berikut ini kita menyalin file-file dari CD-ROM huruf, yang dalam hal ini adalah "e."

copy e:\i386\ntldr c:\ copy e: \ i386 \ NTLDR c: \
copy e:\i386\ntdetect.com c:\ copy e: \ i386 \ ntdetect.com c: \

#Setelah kedua file ini telah berhasil disalin, keluarkan CD dari komputer dan reboot.

Lanjutkan Membaca >>> windows menampilkan : NTLDR is Missing. "Press any key to restart"

PPPOE Mikrotik

/interface ethernet set ether2 name=speedy
/interface ethernet set ether1 name=lokal


ip address add address=192.168.1.5/24 interface=speedy
ip address add address=192.168.9.1/24 interface=lokal

/interface pppoe-client add name=pppoe-client-speedy user=xxxxxxxxx password=xxxxxxxxx interface=speedy service-name=internet disabled=no
/ip route add gateway= 118.96.156.19 <-------------------Getway modem



/ip dns set primary-dns=203.130.208.18 allow-remote-request=yes
/ip dns set secondary-dns=203.130.209.242 allow-remote-request=yes <-------------- DNS speedy modem /liat di modem



/ip firewall nat add chain=srcnat action=masquerade

<--------------- Membuat IP Address Pool
/ip pool add name=dhcp-pool ranges=192.168.9.5-192.168.9.253



<---------------- Menambahkan DHCP Network ini harus sama seperti lokal
ip dhcp-server network add address=192.168.9.0/24 gateway=192.168.9.1


<------------------Menambahkan Server DHCP

/ip dhcp-server add name=DHCP_LAN disabled=no interface=lokal address-pool=dhcp-pool



tinngal ganti getway ma dns/ pwd speedy

Lanjutkan Membaca >>> PPPOE Mikrotik

applikasi reader Jika aku lagi malez membaca

ini sebuah aplikasi bantuan untuk membaca tulisan yang tampil di monitor kita...jika aku sedang bosan membaca biasanya applikasi ini ku gunakan sebagai pengganti mp3 ku...yah wlpun kadang ga paham..namun law lama2 akan terbiasa dan familiar pake aplikasi ini..sangat cocok kalo kita lg malez berhadapan dengan buku ato text di monitor

cara kerja aplikasi :

1. Dundul dulu ya di sini naturalreaders.com
2. Instal lalu ...jalankan dari command di pojok kanan bawah "go to miniboard"untuk memperkecil
3. Lalu selec / bloc text yang ingin anda baca..
4. Tekan Play..
   

owh iya kecepatan pembacaan aplikasi ini bisa di atur juga ko. sayangnya speakingnya masih bahasa asing. coba pake ada pilihan bahasanya ya...wahh bisa di jadikan dongeng sblm tidur + itung2 wat nambah ilmu :)

yap selamat menikmati naturalReader.

Lanjutkan Membaca >>> applikasi reader Jika aku lagi malez membaca